Move cursor over image to zoom.
Click on image to zoom.
Pump DSH-P
New productItem #2124505
Self-priming pump – used with a dust suppression system when wet cutting with petrol saws
- Accessory type: Pumps
- Product information: DSH-P will add 1,3kg (2.8lb) to the tool weight with an overall pump heights of 130mm (5.1") and a diameter of Ø=113mm (4.4’’). The maximum suction lift is up to 1,5m (5 ft) with the included 3.0m (10ft) hose. The hose could be extended to 9.0m (30 ft). Please check that the max. water supply pressure does not exceed 6 bar (87 PSI) and the tightening torque of the fixation screws is 8.0Nm. The water consumption could be up to 1.0 ltr/min (0.264 galon/min) depending on the position of the water valve.
Share
Features & Applications
Features & Applications
Pump DSH-P #2124505
Features
- Provides independence from a pressurised water source
- No assistant required to suppress dust while cutting with petrol saws when you have no access to a pressurised water source
- Can be quickly and easily attached or detached from the DSH-P (only 3 screws)
- Fits all Hilti X-version petrol saws
Applications
- Laying paving: Cutting kerbstones and paving slabs to size
- Road construction: Perimeter cutting in asphalt and concrete
- Floor construction: Cutting expansion joints in fresh concrete
- Construction work: Cutting out openings in brick or concrete walls
- Masonry work: Cutting bricks and blocks to size